DIY Turf Installation Guide-Lay Artificial Grass-artificial grass installer
Taking care of the natural lawn can be a tedious task, not to forget the amount of maintenance it needs, which is why artificial grass is gaining popularity and slowly replacing the natural lawn. If you have decided to switch to synthetic turf and do the installation yourself, this guide is for you. Although at this point, we would recommend contacting an artificial grass installer to install commercial artificial turf.

Trying to install the synthetic turf yourself can be difficult, but not impossible. Our DIY installation guide will show you through the process.

We recommend a professional artificial lawn installation service, but we hope you find these step-by-step instructions useful if you prefer to do it yourself. Contact us if you have any questions about how to lay artificial grass.

 

 

How To Replace Natural Turf With Artificial Grass

Follow the steps mentioned below for artificial grass installation and say yes to lush green lawn twelve months a year without high maintenance.

DIY Turf Installation Guide-Lay Artificial Grass-artificial grass installer

  1. Determine The Size Of Your Area

Calculate the length and width of the entire area you intend to cover with fake grass, taking into account any necessary joins.

  1. Collect All Required Equipment

Collect the materials and tools you need to install your artificial turf. These will include the following:

  • Grasscutter
  • Craft knife vs. Stanley knife
  • Measurement tape
  • Hammer
  • For compacting, use a roller or boards.
  • Tape for joining
  • Grass adhesive
  • Membrane for weeds
  • Pins that have been ground
  • Sand with a sharp edge
  1. Getting Rid Of The Existing Lawn

Make sure the existing surface is removed before you install commercial artificial grass. When you artificial grass installer for installing your fake lawn, the people working there will guide you better. However, if you still plan to continue yourself, remove the lawn by hand, that is, if the area is small. However, if it’s not, use a mechanized turf cutter. However, it is important to remember that you should not build the base layer on topsoil!

  1. Activate The Ground Concentration

With the help of a vibrating plate or a roller, compact the ground with confidence. You can rent a vibrating plate for a low price from equipment rental centres. Planks are a less expensive alternative.

  1. Lay Down Grass Edging

Put this down first if you want to use wood or other edging. To allow water to drain off the lawn, allow the final grass to be in line with the edging; otherwise, it will lead to uneven surfaces.

 

 

  1. Base With Sand Or Stone

Spread a layer of sharp sand, or either way, use granite dust and spread it evenly on the ground. Make sure that you use a minimum of 40mm of either on the commercial artificial grass. Add a little damp sand if the sand is too dry.

  1. Compact The Ground Yet Another Time

Compact the ground with confidence, either with a vibrating plate or roller or with the boards you may have utilized.

  1. Place Your Underlay And Grass On The Floor

Roll out your lawn underlay with care first. Then roll out your artificial grass on top of that, being careful not to disrupt the weed membrane underlay. Remember that your fake grass has a directional pile, so it must all face the same way if you have any joins. To achieve a more natural look, many artificial grass installers, including us, recommend you lay the turf with the pile that leans towards your home or the main area of the home. However, if you prefer to install a performance pad, place it between the grass layer and the underlay.

  1. Allow The Grass To Grow

Allow your artificial grass to settle for at least three hours, preferably overnight, to prevent the grass from creasing or wrinkling.

Artificial Turf Installation-DIY Turf Installation Guide-Lay Artificial Grass-artificial grass installer

  1. Combine Any Parts

To create joints in the commercial artificial grass, utilize high-quality outdoor tape and glue to create the joints in your grass. Follow the instructions on the items before drawing the grass edges together and adding some weight, the tape (shiny side down) and glue. You can use plant pots, stones, and other heavy materials for this case.

  1. Take Care Of The Edges

Cut and trim the artificial grass with a sharp Stanley knife after the settling process is complete, making sure that the grass is cut neatly from around the edges until you have obtained the desired form.

  1. Pin It To The Wall

Use our landscaping pins to secure our fake turf in place. You’ll need flat-headed galvanized nails if you’re utilizing a wood frame.

  1. Relax And Brush The Grass!

Finally, because the grass fibres may be flat from being rolled up, brush against the pile with a firm brush to bring them straight and erect. Then relax and enjoy your synthetic grass lawn!

 

 

Conclusion

Contact us now if you need help from professional artificial grass installers after reading this guide. We provide commercial artificial grass and residential artificial grass for our clients. We are your next-door artificial grass installers for all types of artificial grass needs.

More Resources:

How to Find Best Artificial Grass in 2022

How Much Heat Will Artificial Grass Absorb in the Summer

How to Install Artificial Grass on Dirt

Leave a Reply

Your email address will not be published. Required fields are marked *